[SHOWROOM]  [HOME]

HIGH FREQUENCY STEEL PIPE MAKING MACHINE

CHENG KUN SPEED, DURABILITY AND OPERATING EFFICIENCY FROM TAIWAN LEADER IN PIPE AND TUBE TECHNOLOGY

Outside closed construction can prevent dusts entering into to secure the durability of machine.

  • Solid-state silicon rectifiers and low ripple LC filter circuit.

  • Stabilized DC output.

  • Aluminum oscillator cabinet for lowest RF heating.

  • Facilities with tight device can be cleansed easily.

  • Water-cooled ceramic tank capacitors with condensation protection.

¡@
¡@
MODE/ITEM
CKHM-1030
CKHM-1050
CKHM-1070
CKHM-1100
CKHM-1150
CKHM-1200
Output
30KW
50KW
75KW
100KW
150KW
200KW
Power source
3Ø 220V, 380V, 415V, 440V, 50HZ-60HZ
Power input
60KVA
100KVA
150KVA
200KVA
300KVA
400KVA
Oscillation frequency
250-450KHZ
250-450KHZ
250-450KHZ
200-400KHZ
200-400KHZ
200-400KHZ
Rectifier
Silicon Stack
Forming diameter
1/4"-1/2"
3/8"-1"
1/2"-1.5"
1/2"-2"
1.5"-3"
2"-5"

Forming ply
(m/min)
0.3-0.8
0.3-1.2
0.6-2.6
0.6-3.0
1.2-4.5
1.6-5.4
Forming speed(m/min)
18-40
18-48
20-80
30-80
15-80
15-80
Output adjustment
SCR or I.V.R.
Type of H.F. welder
Induction
Induction
Resistance
Resistance
Dimensions
LxWxH(mm)
1200x1000x1650
1400x1220x1750
1800x1500x2000
1800x1500x2000
1950x1500x2000
1950x1500x2000
Main mechanical equipment

1. Uncoiler
2. End shear & Welding table
3. Hoop cage with Feeder
4. Leveler
5. Forming machine
6. Welding section

7. Cooling section
8. Sizing mill
9. Turks head
10.Main motor
11.Cut off machine
12.Run out table
Remark
We reserve the right to alter technical specification without notice

   ALL RIGHTS RESERVED BY CHENG-KUN ELECTRIC CO.,LTD  

Designed by Walker Chen

The last update on Wed, 04/27/2005